Simply replace theblades when it begins to dull. Note: pre-drilling a hole in the center of the spot weld or using a center punch to create a starting point providesextra guidance/stability when beginning the cut Packages: 1x cutter Drill with double cutter 10x extra 3/8" cutters 2x Pilot Pin 1x Plastic Storage Case 3/8" diameter cutting Blade is Ideal for Removing Spot Welds.

Included: 1pc cutter drill with double cutter + 10pc extra 3/8" cutters + 2pc Pilot Pin + Plastic Storage Case. Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Allow you to avoid the risk of needing to pause in the middle of a job due to dulling blades Drill slow and steady when using these bits and use high temperature lube not included to maximize the life of the blades High temperature lube is the best way to extend blades life but is not required to use this tool.

Double-sided blades allow for twice the efficiency. The double-sided blades are made of high quality heat resistant thicker steel, snap easily and long lifespan. Features: this weld cutter is double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.

Steck 20015 Seam Buster

Manufacturer: STECK. Country of manufacture: Taiwan. Allows easy separation of spot welded or bonded panels without damage For quarter panels, rockers and any other pinch weld Sharp end allows for penetration between the panels Side edge allows for side impact to drive the panels apart Allows you to save up to 15 minutes per panel replacement Super tough alloy steel Auto & Truck Maintenance.

U. A. S. Innovative tool lets you easily separate spot welded or bonded panels without causing any damage.

Seymour 20-1675 PBE Professional Primer, Self Etching/Weld Through Gray

Dry film is 86-percent pigment which results in less smoke and electrode wear when welding, and cuts faster than 100-Percent zinc rich coatings. As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees.

Seymour products do not contain lead, mercury, cadmium, chromates or chlorinated solvents. Heat resistant up to 250˚F. A durable, zinc enhanced coating that protects all metal surfaces. Cuts faster than 100-Percent zinc rich coatings. Large sprayhead gives a professional looking application. A durable, zinc enhanced coating that protects all metal surfaces.

Stops rust creepage. Voc compliant. Manufacturer: STECK. Heat resistant up to 250˚F. Country of manufacture: Taiwan. Dry film is 86-percent pigment which results in less smoke and electrode wear when welding. Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers.

Steck Manufacturing 23230 Plugweld Plier

Copper alloy pad prevents burn through, allows higher welding temperature and better penetration. This is a great accompanying tool to a MIG welder. A durable, zinc enhanced coating that protects all metal surfaces. Panels won't separate and weld will not stick to the copper pad. Country of manufacture: Taiwan.

Manufacturer: STECK. The special copper alloy backing plate prevents burn through and the weld can't stick to the copper, even if a pilot hole was used. Cuts faster than 100-Percent zinc rich coatings. Unique design allows technician to clamp panels at the precise spot and still allow for welding. Plugweld pliers allow you to get aggressive with welding panels together.

Dry film is 86-percent pigment which results in less smoke and electrode wear when welding. Plugweld Pliers make plugwelding easier and improve quality. Electrochemical galvanic action keeps on protecting even if scratched. Auto & Truck Maintenance. Heat resistant up to 250˚F. Reduce the risk of burn through from your welder.

.

ACDelco 10-2013 Body Joint and Seam Filler Compound - 10.1 oz

Copper alloy pad prevents burn through, allows higher welding temperature and better penetration. Country of manufacture: Taiwan. Panels won't separate and weld will not stick to the copper pad. This product is safe to use on automotive paint. A durable, zinc enhanced coating that protects all metal surfaces.

It is water resistant, stays permanently flexible, and withstands weathering, gasoline, oxidation, salt water, and most solvents. Manufacturer: STECK. Flexible, non-staining, and non-sagging product that will not crack or shrink. Can be used for all sealing and adhesive applications with a standard caulking gun in both vertical and horizontal joints.

Electrochemical galvanic action keeps on protecting even if scratched. Cuts faster than 100-Percent zinc rich coatings. Acdelco medium body seam-sealing Compound should not be applied near catalytic convertors and mufflers, due to extreme heat conditions. Dry film is 86-percent pigment which results in less smoke and electrode wear when welding.

Plugweld Pliers make plugwelding easier and improve quality. For professional use only, Not for Retail Sale Auto & Truck Maintenance. Heat resistant up to 250˚F.

Blair 11096 Cutter Set

These annular tools cut clean, burr-free and round holes fast unlike twist drills that push or hole saws that tear through materials. Manufacturer: STECK. Copper alloy pad prevents burn through, allows higher welding temperature and better penetration. These cutters are packaged in a plastic carrying case. Made of M2 high speed steel.

Made of m2 High Speed Steel. Country of manufacture: Taiwan. Features and benefits: 3 3/8" cutters; fit 3/8" and 1/2" hand held drill chucks. Cuts faster than 100-Percent zinc rich coatings. Dry film is 86-percent pigment which results in less smoke and electrode wear when welding. Flexible, non-staining, and non-sagging product that will not crack or shrink.

Extra pilot included. Extra pilot included. Arbor assembly 11123 with skip proof Pilot. Unique design allows technician to clamp panels at the precise spot and still allow for welding. Multiple cutting teeth, precision ground which allows for a long tool life. Heat resistant up to 250˚F.

ABN Spot Weld Cutter Drill Bit 3-Piece Set - High-Speed Steel HSS Cobalt Titanium Coated Welding Remover Bits Tool Kit

Drill hard steel and stainless steel materials with the aBN Spot Weld Cutter Drill Bit 3-Piece Set - High-Speed Steel HSS Cobalt Titanium Coated Welding Remover Bits Tool Kit. 3 3/8" cutters; fit 3/8" and 1/2" hand held drill chucks. Electrochemical galvanic action keeps on protecting even if scratched. Each drill bit has permanently etched size markings for quick identification.

Flexible, non-staining, and non-sagging product that will not crack or shrink. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm. Heat resistant up to 250˚F. This package includes 3 bits 1/4-inch x 1-3/4-inch, 5/16-inch x 1-3/4-inch, 3/8-inch x 1-3/4-inch inside a storage case for your convenience.

Can be used for all sealing and adhesive applications with a standard caulking gun in both vertical and horizontal joints. Dry film is 86-percent pigment which results in less smoke and electrode wear when welding. For more information go to www. P65warnings. Ca. Gov.

Steck Manufacturing 20016 Right Angle Seam Buster

Country of manufacture: Taiwan. Built to last: titanium coating offers a smooth drilling experience that prevents dulling from overheating for extended performance; We recommend using cutting lubricant and a spot weld chisel to extend the life of these drill bits lubricant and chisel not included. Super tough alloy steel.

Made of M2 high speed steel. Unique design allows technician to clamp panels at the precise spot and still allow for welding. Effortlessly remove spot welds: use the abn spot weld cutter drill bit 3-piece set - high-speed steel hss cobalt titanium coated Welding Remover Bits Tool Kit to drill into harder steel materials and stainless steel; Length of each bit is 1-3/4-inches 45mm; Sizes include 1/4-inch 6.

5mm, 5/16-inch 8mm, and 3/8-inch 10mm; Each drill bit has permanently etched size markings for quick identification. 90 degree end to easily separate hard-to-reach spotwelded or bonded panels. For quarter panels, rockers and any other pinchweld. Three sharpened edges designed to allow bi-directional hammer use on quarter panels, rockers and any other pinchweld.

Made from a super tough alloy steel and has a cushioned handle that absorbs the shock. The sharp end allows for penetration between the panels and the two lower edges allows for side impact to drive the panels apart.

Dupli-Color EDPP108 Weld Thru Cold Galvanizd Primer, Packaging may vary

3 3/8" cutters; fit 3/8" and 1/2" hand held drill chucks. For quarter panels, rockers and any other pinchweld. Easy to install and good quality accessories for your vehicles. 90 degree end to easily separate hard-to-reach spotwelded or bonded panels. Built to last: titanium coating offers a smooth drilling experience that prevents dulling from overheating for extended performance; We recommend using cutting lubricant and a spot weld chisel to extend the life of these drill bits lubricant and chisel not included.

Manufacturer: STECK. Unique design allows technician to clamp panels at the precise spot and still allow for welding. Package contents: package includes 3 bits and 1 storage case for your convenience; Length 1-3/4-inch 45mm; Sizes: 1/4-inch 6. 5mm, 5/16-inch 8mm, and 3/8-inch 10mm. Manufactured in China. Specially designed: unlike pilot bits that drill through both surfaces, these bits are easy to control while cutting without penetrating the lower surface; Non-slip special centering nib design with flat shaft for sure grip.

Effortlessly remove spot welds: use the abn spot weld cutter drill bit 3-piece set - high-speed steel hss cobalt titanium coated Welding Remover Bits Tool Kit to drill into harder steel materials and stainless steel; Length of each bit is 1-3/4-inches 45mm; Sizes include 1/4-inch 6. 5mm, 5/16-inch 8mm, and 3/8-inch 10mm; Each drill bit has permanently etched size markings for quick identification.

Cuts faster than 100-Percent zinc rich coatings.

OEMTOOLS 25337 Seam Splitter Set, 3-Piece

Specially designed: unlike pilot bits that drill through both surfaces, these bits are easy to control while cutting without penetrating the lower surface; Non-slip special centering nib design with flat shaft for sure grip. Plugweld Pliers make plugwelding easier and improve quality. Cushioned handle absorbs shock.

Panels won't separate and weld will not stick to the copper pad. Extra pilot included. This product is a Weld Thru Cold Galvanized Primer. Easy to install and good quality accessories for your vehicles. Easy storage: heavy-duty 3. 9" x 3" x 1. 1" inch 9. 9cm x 7. 6cm x 2. 8cm aluminum carrying case with internal foam tray for easy transportation, safe storage, and quick organization; Foam tray includes printed size markings for simple identification.

Dry film is 86-percent pigment which results in less smoke and electrode wear when welding. Super tough alloy steel. Includes straight, 30 degree offset and 90 degree angle seam splitters. Flexible, non-staining, and non-sagging product that will not crack or shrink.

Blair 11750 Lubricant

Extra pilot included. Built to last: titanium coating offers a smooth drilling experience that prevents dulling from overheating for extended performance; We recommend using cutting lubricant and a spot weld chisel to extend the life of these drill bits lubricant and chisel not included. For quarter panels, rockers and any other pinchweld.

Easy to install and good quality accessories for your vehicles. Flexible, non-staining, and non-sagging product that will not crack or shrink. Dry film is 86-percent pigment which results in less smoke and electrode wear when welding. A durable, zinc enhanced coating that protects all metal surfaces. Electrochemical galvanic action keeps on protecting even if scratched.

Made in the USA. Tough chrome vanadium steel. 90 degree end to easily separate hard-to-reach spotwelded or bonded panels. Easy storage: heavy-duty 3. 9" x 3" x 1. 1" inch 9. 9cm x 7.