Ancor Marine Grade Products 321503 AWG Heat Shrink Ring Terminals 3 Pack, 5/16″

#ad
Marinco Electrical Group 321503 #ad - Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. Ul listed and csa recognized. Pure copper for maximum current flow. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Brazed seam for maximum strength. Heat activated adhesive built into the sleeve of the heat shrink tubing.

Tinned for corrosion resistance. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.

#ad



Ancor Marine Grade Products 8 AWG Heat Shrink Butt Connectors 3 Pack

#ad
Marinco Electrical Group 309303 #ad - Pure copper for maximum current flow. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Brazed seam for maximum strength. Ul listed and csa recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing.

When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.

#ad



Ancor Marine Grade Products 12-10 AWG Heat Shrink Female Disconnects 25 Pack

#ad
Marinco Electrical Group 320825 #ad - 25 pack of 12-10 awG female heat shrink disconnects. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Ul 310 and cSA recognized. Ul listed and csa recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.

Pure copper for maximum current flow. Heat activated adhesive built into the sleeve of the heat shrink tubing. Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow.

Ancor Marine Grade Products 12-10 AWG Heat Shrink Female Disconnects 25 Pack #ad - Tinned for corrosion resistance. Brazed seam for maximum strength.

#ad



Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 8 AWG

#ad
Ancor Marine Grade Products 111502 #ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Tinned for corrosion resistance, Pure copper for maximum current flow. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Ul listed and csa recognized. 25 feet of red 8 AWG marine grade wire. Heat activated adhesive built into the sleeve of the heat shrink tubing. The ancor marinco electrical group battery cable is the perfect wiring accessory that you need to always keep in your ever growing boating tool kit.

Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 8 AWG #ad - Tinned for corrosion resistance. 25 pack of 12-10 awG female heat shrink disconnects. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. They are constructed with premium vinyl insulation that is rated at 600 volts, heat, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, oil, battery acid, abrasion and ultra-violet radiation.

Brazed seam for maximum strength. Ul 310 and cSA recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

#ad



Ancor Marine Grade Duplex Cables

#ad
Ancor 121310 #ad - 25 feet of red 8 AWG marine grade wire. Brazed seam for maximum strength. Exclusive insulation is rated at 600 volts, 105° C dry and 75° C Inner conductors are correctly color-coded to ABYC standards. 25 pack of 12-10 awG female heat shrink disconnects. Ul listed and csa recognized. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Tinned for corrosion resistance. Ancor duplex cables are made to surpass the highest UL Boat Cable standards with ultra flexible Type 3/Class K stranding to resist fatigue due to vibration and flexing. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Ancor's proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation.

Ancor Marine Grade Duplex Cables #ad - Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ul 310 and cSA recognized. Tinned for corrosion resistance, Pure copper for maximum current flow. Shrinks to form a water tight seal and the ultimate vibration and strain relief. They are constructed with premium vinyl insulation that is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, gasoline, oil, heat, battery acid, abrasion and ultra-violet radiation.

#ad



Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP

#ad
Acr Electronics 5191 #ad - 25 pack of 12-10 awG female heat shrink disconnects. Ignition protected when used with MRBF fuses. Brazed seam for maximum strength. Heat activated adhesive built into the sleeve of the heat shrink tubing. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Pure copper for maximum current flow.

Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Ignition protected when used with Blue Sea Systems' MRBF Terminal Fuse. The premium vinyl insulation is rated at 600 volts, heat, 105 deg C dry and 75 deg C wet, gasoline, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, abrasion and ultra-violet radiation.

Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP #ad - Voltage max operating: 58v dc, terminal stud size: 5/16"-18 8mm, terminal fuses avail. 30a-300a, amps max operating: 300a per block, Mounting Hole Size: #10 5mm3/8". Compact, inverter, high-amp fuse-appropriate for DC Main, windlass, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments.

Compact, inverter, windlass, high-amp fuse—appropriate for DC Main, and bow thruster circuit protection. Insulating cap prevents accidental shorts. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

#ad



Blue Sea Systems MaxiBus 250A BusBar with Four 5/16

#ad
Blue Sea Systems 2127-BSS #ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. Tinned for corrosion resistance, Pure copper for maximum current flow. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

. Max voltage: 300v aC/ 48V DC. Tinned for corrosion resistance. 25 feet of red 8 AWG marine grade wire. Ul listed and csa recognized. 250a maxibus busBar with 4 studs. Pure copper for maximum current flow. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. 25 pack of 12-10 awG female heat shrink disconnects.

Blue Sea Systems MaxiBus 250A BusBar with Four 5/16 #ad - Continuous rating: 250A AC/DC. Ul 310 and cSA recognized. Ignition protected when used with MRBF fuses. Bus material - tin platted copper cda 110/uns c1100 insert molded stainless steel studs eliminate need for securing nut and allow high torqueing for excellent electrical contact Raised bus provides easy access to multiple wires on a single stud.

2 mounting holes accept #10 M5 screws. They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, heat, oil, gasoline, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

#ad



Blue Sea Systems 250A MRBF Terminal Fuse

#ad
Blue Sea Systems 5189 #ad - 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. 250a maxibus busBar with 4 studs. The premium vinyl insulation is rated at 600 volts, battery acid, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, 105 deg C dry and 75 deg C wet, heat, abrasion and ultra-violet radiation.

Voltage max operating: 58v dc, terminal stud size: 5/16"-18 8mm, terminal fuses avail. 30a-300a, amps max operating: 300a per block, Mounting Hole Size: #10 5mm3/8". Compact, inverter, high-amp fuse-appropriate for DC Main, windlass, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments.

Blue Sea Systems 250A MRBF Terminal Fuse #ad - Tinned for corrosion resistance, Pure copper for maximum current flow. Fuses sold separately. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Insulating cap prevents accidental shorts. 10, 000 aic at 14v dc satisfies abyc requirements for dc main circuit protection on large battery banks Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal 1, 000A Interrupt Capacity.

Heat activated adhesive built into the sleeve of the heat shrink tubing.

#ad



Ratcheting Single Crimp

#ad
MARINCO 703010 #ad - Pure copper for maximum current flow. Heat activated adhesive built into the sleeve of the heat shrink tubing. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Ratcheting operation with ergonomic handle to prevent hand fatigue. Visible indication of blown condition. Fuses sold separately.

Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. 25 pack of 12-10 awG female heat shrink disconnects. Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal. Tinned for corrosion resistance. Ignition protected-safe for installation aboard gasoline powered boats.

Ratcheting Single Crimp #ad - 2 mounting holes accept #10 M5 screws. Ul listed and csa recognized. Brazed seam for maximum strength. When it comes to marine electrical wiring, connectors Also have to be able to stand up to the corrosive ocean environment. 250a maxibus busBar with 4 studs. Heat activated adhesive built into the sleeve of the heat shrink tubing.

General purpose wire and components designed for on-shore applications caused significant problems as electrical systems became more sophisticated and demanding.

#ad



Ancor 220011 Heat Shrink Butt Connector Kit

#ad
MARINCO 220011 #ad - Ul 310 and cSA recognized. Tinned for corrosion resistance, Pure copper for maximum current flow. Ip66 - protected against powerful water jets. Continuous rating: 250A AC/DC. Ancor was founded over twenty years ago to solve electrical problems experienced by Mariners as they ventured offshore in large numbers.

When it comes to marine electrical wiring, connectors Also have to be able to stand up to the corrosive ocean environment. Heat activated adhesive built into the sleeve of the heat shrink tubing. 2 mounting holes accept #10 M5 screws. Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity.

Ancor 220011 Heat Shrink Butt Connector Kit #ad - Insulating cap prevents accidental shorts. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Part number: 220011. Pure copper for maximum current flow. Ignition protected-safe for installation aboard gasoline powered boats. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards.

They are constructed with premium vinyl insulation that is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, heat, gasoline, oil, 105 deg C dry and 75 deg C wet, abrasion and ultra-violet radiation. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

#ad



Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

#ad
Blue Sea Systems 5026 #ad - Part number: 220011. Positive distribution bus with #10-32 stud. 250a maxibus busBar with 4 studs. Fuses sold separately. Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity. Heat activated adhesive built into the sleeve of the heat shrink tubing. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks.

They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, heat, 105 deg C dry and 75 deg C wet, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, abrasion and ultra-violet radiation. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. Ip66 - protected against powerful water jets. Heat shrink butt connector Kit. Must be fully closed before tool allows itself to open ensuring proper crimp.

Shrinks to form a water tight seal and the ultimate vibration and strain relief.

#ad