Blue Sea Systems MaxiBus 250A BusBar with Four Terminal 18 Studs of 5/16-Inch

Max voltage: 300v aC/ 48V DC. Continuous rating: 250A AC/DC. Bus material - tin platted copper cda 110/uns c1100 insert molded stainless steel studs eliminate need for securing nut and allow high torqueing for excellent electrical contact Raised bus provides easy access to multiple wires on a single stud.

. 250a maxibus busBar with 4 studs. Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity. 2 mounting holes accept #10 M5 screws.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Can be used for 24-hour circuits. 3. 32"w x 6. 5"h x 1. 52"d. Fuse block, 12 circuit, atc/ato, mfg# 5026, w/negative bus and cover, 32VDC max W/30Amp max per circuit & 100Amp per block.

Positive distribution bus with #10-32 stud. Accepts ato and ATC fast acting blade fuses. Fuses sold separately. St blade fuse block - 12 circuits with negative bus and cover.

On-Off - BEP 701 Battery Switches

Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds. The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C 212 deg F above the ambient temperature.

The continuous and intermittent ratings are tested at 110% of specified ratings. All bep switches are tested Independently to this specification by a 3rd party laboratory. The rear cover insulating the rear terminals against any short circuits. Accepts ato and ATC fast acting blade fuses. Tin-plated copper studs and nuts.

This ensures the switch meets ABYC requirements. The control knob can be removed by switching to an counterclockwise 45 degree position. This switch offers a number of unique features, allowing it to be a stand alone unit, the highlight being the patented Contour Locking System, or locked together with other switches.

Control knob can be removed by switching to counter-clockwise 45° position. Three removable side plates provide access of up to 1/0 cables. This control knob also features an interchangeable labeling system allowing a full range of applications Item # 713 or 715.

10-Way Blade Fuse Box LED Indicator for Blown Fuse Protection Cover 100 Amps - Fuse Block for Automotive

Control knob can be removed by switching to counter-clockwise 45° position. Led indicator for blown fuse - easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. Fuse protection cover - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.

100 amp rating - maximum of 30 Amp per circuit & 100 Amp per panel. Heavy duty construction - this fuse panel has a #10-32 stud for power feed,. 250" male quick disconnect terminals, and can take an input voltage of 10 - 32 V DC. User manual available for download under product Information Details; Search for "Online LED Store Fuse Box" on YouTube for How To Video.

Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. This fuse panel has a #10-32 stud for power feed,. 250" male quick disconnect terminals, can handle a maximum of 30 Amp per circuit with a maximum of 100 Amp per panel, can take an input voltage of 10 - 32 V DC, and has a cover for additional protection.

Interchangeable/compatible with:All automobiles and devices equipped with a 10-32 Volt DC power source. Features:High quality construction. Red led illuminates when fuse is blown.

Ancor Marine Grade Primary Wire and Battery Cable Red, 100 Feet, 14 AWG

Length 100'. Control knob can be removed by switching to counter-clockwise 45° position. Can be used for 24-hour circuits. Ignition protected. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements.

Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. St blade fuse block - 12 circuits with negative bus and cover. Operation: on/off, 1250a dc cranking 10 sec, rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, voltage: 48v dc, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Accepts ato and ATC fast acting blade fuses. Tin-plated copper studs and nuts. Color is Red. The ancor marinco electrical group primary wire is the perfect wiring accessory that you need to always keep in your ever growing boating tool kit.

. Led indicator for blown fuse - easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. Fuse protection cover - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.

6-Way Blade Fuse Box LED Indicator for Blown Fuse Protection Cover 100 Amp - Fuse Block for Automotive

Led indicator for blown fuse - easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. Fuse protection cover - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses. 100 amp rating - maximum of 30 Amp per circuit & 100 Amp per panel.

Heavy duty construction - this fuse panel has a #10-32 stud for power feed,. 250" male quick disconnect terminals, and can take an input voltage of 10 - 32 V DC. User manual available for download under product Information Details; Search for "Online LED Store Fuse Box" on YouTube for How To Video. This ensures the switch meets ABYC requirements.

Positive distribution bus with #10-32 stud. Operation: on/off, voltage: 48v dc, rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Length 100'.

Ignition protected. Accepts ato and ATC fast acting blade fuses. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

VETOMILE 6-way Fuse Box Blade Fuse Block Holder Screw Nut Terminal 5A 10A 15A 20A Free Fuses LED Indicator Waterpoof Cover for Automotive Car Marine Boat

Ignition protected. Led indicator for blown fuse - easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. Fuse protection cover - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses. 100 amp rating - maximum of 30 Amp per circuit & 100 Amp per panel.

Heavy duty construction - this fuse panel has a #10-32 stud for power feed,. 250" male quick disconnect terminals, and can take an input voltage of 10 - 32 V DC. User manual available for download under product Information Details; Search for "Online LED Store Fuse Box" on YouTube for How To Video. Widely used- can be used in car, yacht, bus, motor homes, suv, ship, all system with maximum of 32V and 100A.

Protection and quality- fuse box connect to a lot of devices to avoid burnout with the plugged fuse, with tough and wearable PBT material. Convenient design- easy installed, waterproof and dustproof cover, comes with 12 4-colored fuses, 6 red LED indicators show the burnout of fuse. Warranty and service- vetomile offer one year warranty and life long friendly customer service.

Package- one fuse box, 2 pieces of 10a red fuses, 4 pieces of 20A yellow fuses, 4 pieces of 15a blue fuses, 2 pieces of 5A orange fuses, 4 screws, one sticker. Color is Red. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.



Blue Sea Systems e-Series On/Off Battery Switch

Ip66 waterproof, iso 8846 and meets ABYC requirements. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected-safe for installation aboard gasoline powered boats.

. St blade fuse block - 12 circuits with negative bus and cover. E series battery switch, mfg# 9003E, Red, 350A control.600a int. 48vdc. Led indicator for blown fuse - easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. Fuse protection cover - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.

100 amp rating - maximum of 30 Amp per circuit & 100 Amp per panel. Heavy duty construction - this fuse panel has a #10-32 stud for power feed,. 250" male quick disconnect terminals, and can take an input voltage of 10 - 32 V DC. User manual available for download under product Information Details; Search for "Online LED Store Fuse Box" on YouTube for How To Video.

104810 is primary Wire. Length 100'.

Single Pole, 15A - Blue Sea Systems A-Series White Toggle Circuit Breaker

Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. St blade fuse block - 12 circuits with negative bus and cover. Terminal stud size: 3/8" - 16. Circuit breaker, magnetic/hydraulic operation, a series, won't reset W/short, single pole, Mfg# 7210, 15A AC/DC, white toggle switch, panel mount with 5/8" round opening, 2"H x .

75"w x 1. 64"d; blade terminal W/#10-32 screw. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Tin-plated copper studs and nuts. Trip free" design cannot be held "ON" during fault current condition.

Combines swtiching and circuit protection into a single device. Accepts ato and ATC fast acting blade fuses. Ignition protected-safe for installation aboard gasoline powered boats. Color is Red. Operation: on/off, 455a dc intermittent 5 min, 1250a dc cranking 10 sec, Rating: 275A DC Continuous 1hr, voltage: 48v dc, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Control knob can be removed by switching to counter-clockwise 45° position.

Ancor 121510 Marine Grade Duplex Cables, 14/2 AWG 2 x 2mm², Flat, 100ft

Accepts ato and ATC fast acting blade fuses. Switches a single battery to a single load group. Positive distribution bus with #10-32 stud. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. The premium vinyl insulation is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, gasoline, heat, battery acid, 105 deg C dry and 75 deg C wet, abrasion and ultra-violet radiation.

Ignition protected. Operation: on/off, 455a dc intermittent 5 min, voltage: 48v dc, 1250a dc cranking 10 sec, Rating: 275A DC Continuous 1hr, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Length 100'. Continuous rating: 350A, Maximum voltage: 48V DC.

Can be used for 24-hour circuits. Tin-plated copper studs and nuts. Ip66 waterproof, iso 8846 and meets ABYC requirements. Terminal stud size: 3/8" - 16. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

This ensures the switch meets ABYC requirements.

Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red

Accepts ato and ATC fast acting blade fuses. Trip free" design cannot be held "ON" during fault current condition. 2. 83"w x 2. 83"h x 3. 1"d. Positions: single-circuit On-Off. Frequently used for AC or DC Branch circuits. This ensures the switch meets ABYC requirements. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

Ip66 waterproof, iso 8846 and meets ABYC requirements. Ignition protected-safe for installation aboard gasoline powered boats. The premium vinyl insulation is rated at 600 volts, battery acid, gasoline, heat, 105 deg C dry and 75 deg C wet, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

Single circuit on-off. With removable knob. St blade fuse block - 12 circuits with negative bus and cover. Tin-plated copper studs and nuts. Led indicator for blown fuse - easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. Fuse protection cover - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.

100 amp rating - maximum of 30 Amp per circuit & 100 Amp per panel.