Hakko T18 Series Chisel Pack with T18-D08/D12/D24/D32/S3 Tips Model:

#ad
Hakko #ad - T18-d12 - 1. 2 x 14. 5mm. T18-d24 - 2. 4 x 14. 5mm. T18-d08 - 08 x 14. 5mm. T18-d32 - 3. 2 x 14. 5mm. Hakko t-18 series chisel tips for the fx-8801/FX-888/900M/907/913 Irons. T18-s3 - 5. 2 x 18mm. Pack of 5 different tips, one of each.

#ad



Bundle Includes Soldering Station and CHP170 cutter

#ad
Hakko FX888D-23BY-Kit2 #ad - Thermal recovery graph rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work. Hakko fx-888d performance comparison graph with conventional stations Able to shorten the time required for the same work and improve work efficiency significantly. Iron holder with full of functions An iron holder of the same color of a soldering station comes as a set.

Reliable digital technology by hakko – introducing the hakko fx-888D Excellent thermal recovery Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life.

Digital soldering station end safe version with Chp170 cutter. Adjustable temperature control. Designed to be user-friendly small footprint Compact station body requires a space of only 100 W x 120 D mm. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment.

Bundle Includes Soldering Station and CHP170 cutter #ad - Also fx-888d delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. What’s more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over. Temperature range 120° - 899° f 50° - 480° c.

#ad



Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container

#ad
Thermaltronics FBA_TMT-TC-2 #ad - Fx-888d kit version with CHP170 cutter. Thermaltronics tmt-tc-2 tip tinners provides fast, efficient cleaning and re-tinning of blackened and highly oxidized soldering iron tips, safely and efficiently. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station. Rapidly re-tins badly oxidised soldering iron tips.

Thermaltronics tmt-tc-2 tip tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. Lead free RoHS Compliant. Removes tip oxidation. Minimal residues. Digital display shows °ree; f or °ree; c. Temperature range 120° - 899° f 50° - 480° c. No-clean compatible formulation.

Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container #ad - Digital soldering station end safe version with Chp170 cutter. Adjustable temperature control.

#ad



Micro Cutter

#ad
Quality Hand Tools CHP-170 #ad - Removes tip oxidation. 2. 5mm heat-treated carbon steel construction provides durability and long life. Digital soldering station end safe version with Chp170 cutter. Fx-888d kit version with CHP170 cutter. Rapidly re-tins badly oxidised soldering iron tips. Lead free RoHS Compliant. No-clean compatible formulation.

Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. The hakko chp-170 cutter is an excellent general use tool. Digital display shows °ree; f or °ree; c. Minimal residues. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1.

Micro Cutter #ad - 3mm copper and soft wire. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Adjustable temperature control. Temperature range 120° - 899° f 50° - 480° c. 21-degree.

#ad



Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter

#ad
Kester 24-6337-0027 #ad - Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Although" 44" is a ra-based material, the residues are non-corrosive If not cleaned. Temperature range 120° - 899° f 50° - 480° c. Digital soldering station end safe version with Chp170 cutter.

Core size: 66. Lead free RoHS Compliant. Per j-std-004b, " 44" is classified as Rom1 flux. Composition: 63 percent tin, 37 percent lead. Rapidly re-tins badly oxidised soldering iron tips. Minimal residues. 21-degree. No-clean compatible formulation. 2. 5mm heat-treated carbon steel construction provides durability and long life.

Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter #ad - Digital display shows °ree; f or °ree; c. Removes tip oxidation. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. 0031 inch.

#ad



Rosin Paste Flux #135 in a 2 oz Jar

#ad
SRA Soldering Products FLS135 #ad - Contains 2 ounce in a "hockey Puck" jar. Minimal residues. This petroleum/rosin contains NO Zinc Chloride or Ammonium Chloride, making it a better choice for electronic repairs. Composition: 63 percent tin, 37 percent lead. The ideal flux for electrical and electronic repairs. Fx-888d kit version with CHP170 cutter.

Core size: 66. Adjustable temperature control. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Rosin leaves a protective coating over soldered area once job is finished Digital soldering station end safe version with Chp170 cutter.

Rosin Paste Flux #135 in a 2 oz Jar #ad - Lead free RoHS Compliant. 21-degree. 2. 5mm heat-treated carbon steel construction provides durability and long life. Removes tip oxidation. 0031 inch. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire.

#ad



Hakko FS100-01 Tip Cleaning Paste 10 g for FT-700

#ad
Hakko FS100-01 #ad - Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Rapidly re-tins badly oxidised soldering iron tips. 21-degree. Doesn't contain lead or di-ammonium phosphate. Re-tins oxidized soldering iron tips and increases tip life.

The ideal flux for electrical and electronic repairs. 0031 inch. Adjustable temperature control. Removes tip oxidation. Lead free RoHS Compliant. Core size: 66. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. 2. 5mm heat-treated carbon steel construction provides durability and long life.

Hakko FS100-01 Tip Cleaning Paste 10 g for FT-700 #ad - Lead-free compound insures this item can be used on all soldering tips. Free of di-ammonium phosphate which shortens tip life. Composition: 63 percent tin, 37 percent lead. Combines with the ft-700 Polisher for enhanced results.

#ad



NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

#ad
NTE Electronics, Inc. SW02-10 #ad - Temperature range 120° - 899° f 50° - 480° c. Free of di-ammonium phosphate which shortens tip life. Composition: 63 percent tin, 37 percent lead. Doesn't contain lead or di-ammonium phosphate. Re-tins oxidized soldering iron tips and increases tip life. 2. 5mm heat-treated carbon steel construction provides durability and long life.

Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Available with standard or anti-static bobbins. Fx-888d kit version with CHP170 cutter.

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length #ad - Formulated for use with tin/lead and lead-free alloys. Digital display shows °ree; f or °ree; c. Adjustable temperature control. Combines with the ft-700 polisher for enhanced results. Contains 2 ounce in a "hockey Puck" jar. Nte solder wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.

#ad



Hakko T18BL Series Soldering Tip for FX-888/FX-8801, Conical, R 0.2 mm x 22.5 mm

#ad
Hakko T18BL #ad - Fx-888d kit version with CHP170 cutter. For use with fx-8801. Soldering tip, conical, 02mm x 22. 5mm. Available with standard or anti-static bobbins. Digital soldering station end safe version with Chp170 cutter. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.

Fx-8801, c1148b. The ideal flux for electrical and electronic repairs. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Adjustable temperature control. Application Soldering. No-clean compatible formulation. For use with FX-8801. 2. 5mm heat-treated carbon steel construction provides durability and long life.

Hakko T18BL Series Soldering Tip for FX-888/FX-8801, Conical, R 0.2 mm x 22.5 mm #ad - Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Contains 2 ounce in a "hockey Puck" jar. Digital display shows °ree; f or °ree; c.

#ad



Kester 24-6337-0010 44 Rosin Core Solder 63/37 .020 1 lb. SPOOL

#ad
Kester 24-6337-0010 #ad - Leaves bright/shiny solder joints after reflow. Application soldering. Industry standard for decades. Standard core 66 3. 3 percent flux. 21-degree. High activity rosin core formulation. Free of di-ammonium phosphate which shortens tip life. The high mobility and fast-spreading action of this flux results in more reliable production line soldering.

No-clean compatible formulation. Digital soldering station end safe version with Chp170 cutter. Excellent solderability to a wide variety of metallization's. Adjustable temperature control. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire.

Kester 24-6337-0010 44 Rosin Core Solder 63/37 .020 1 lb. SPOOL #ad - Digital display shows °ree; f or °ree; c. Doesn't contain lead or di-ammonium phosphate. Composition: 63 percent tin, 37 percent lead. The ideal flux for electrical and electronic repairs. Fx-888d kit version with CHP170 cutter. Contains 2 ounce in a "hockey Puck" jar.

#ad



Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber

#ad
American Hakko Products, Inc FA400-04 #ad - Free of di-ammonium phosphate which shortens tip life. Rapidly re-tins badly oxidised soldering iron tips. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Leaves bright/shiny solder joints after reflow. For use with fx-8801. Standard core 66 3. 3 percent flux. Low profile position provides approximately 2-1/2 times the airflow and efficiency.

Formulated for use with tin/lead and lead-free alloys. 21-degree. Quick and easy filter replacement. The unit can be used in a vertical standing up position or low-profile position laying down. When used in the low-profile laying down position, efficiency and air flow is increased by approximately 2. 6 times. The ideal flux for electrical and electronic repairs.

Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber #ad - Breathe easy with the Hakko FA-400 bench top smoke absorber. Doesn't contain lead or di-ammonium phosphate. Available with standard or anti-static bobbins. Fx-888d kit version with CHP170 cutter. Soldering tip, conical, 0

#ad