OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head

OESS - Maximum width of Jaw opening is 90mm. Strong die-cast construction. 3 prong finger style rubber-coated head 360°Swivel lab clamp Sold as 1 pcs 360 degrees swivels 3 finger lab clamp. 3 finger clamp accepts rods up to 20 mm. Covered jaws for protection and grip.





American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size

American Educational 7-G15-A - Type is coated with an acid resistant finish. Available in cast iron. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Base size: 8" length by 5" width, rod size: 3/8" diameter by 20" length. Coated with an acid resistant finish. Made of cast iron. The rods are nickel plated steel and are threaded to fit the base.

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size - Strong and dependable support. The rods are nickel plated steel and are threaded to fit the base. Strong and dependable support.





United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width

United Scientific Supplies SSB6X9 - Made of cast iron. Removable, zinc plated steel rods. The rods are nickel plated steel and are threaded to fit the base. Stamped steel bases, with black enamel finish. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Strong and dependable support. Bases and Rods are also available individually. Coated with an acid resistant finish.

United Scientific Supplies.





EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head

EISCO CH0688 - United Scientific Supplies. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Made of cast iron. The rods are nickel plated steel and are threaded to fit the base. Coated with an acid resistant finish. Extends out approximately 5" from rod, not adjustable.

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head - Attaches to rods up to 15 mm in diameter. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter. Jaws have a capacity of 90 mm. Strong and dependable support. Can mount vertical or horizontal -- rotates on clamp.





OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip

OESS - Can mount vertical or horizontal -- rotates on clamp. Made of cast iron. Maximum width of Jaw opening is 90mm. Coated with an acid resistant finish. Attaches to rods up to 15 mm in diameter. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip - 3 prong finger style rubber-Coated Head lab clampBlack lab retort stand bosshead clamp holder Strong and dependable support. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Covered jaws for protection and grip. 3 finger clamp accepts rods up to 20 mm. Extends out approximately 5" from rod, not adjustable.

United Scientific Supplies. Strong die-cast construction. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. The rods are nickel plated steel and are threaded to fit the base.





OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip

OESS FCBC - Package include:1 pcs 2 finger adjustment lab clamp rubber-wrapped head and 1 pcs black lab stand clipPerfect for laboratory use Strong and dependable support. Attaches to rods up to 15 mm in diameter. Maximum width of Jaw opening is 90mm. Extends out approximately 5" from rod, not adjustable. The rods are nickel plated steel and are threaded to fit the base.

OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip - Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Maximum width of Jaw opening is 5cm. United Scientific Supplies. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip.

Can mount vertical or horizontal -- rotates on clamp. Coated with an acid resistant finish. Rubber-wrapped jaws will safely protect your glassware from scratching bad. Covered jaws for protection and grip. Strong die-cast construction. 3 finger clamp accepts rods up to 20 mm. Strong die-cast construction.





Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia

EISCO - Blue powder coated support stand base 8" x 5. 25". Extends out approximately 5" from rod, not adjustable. Maximum width of Jaw opening is 5cm. Can mount vertical or horizontal -- rotates on clamp. Strong die-cast construction. Made from high-quality metal and built to last. United Scientific Supplies. Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use.

Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Stainless steel rod with a powder coated base provides the perfect setup for any experiment. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Maximum width of Jaw opening is 90mm.

Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Covered jaws for protection and grip. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Strong die-cast construction.





American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size

American Educational 7-G14 - Made of cast iron. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Coated with an acid resistant finish. Strong die-cast construction. Coated with an acid resistant finish. The rods are nickel plated steel and are threaded to fit the base. Strong and dependable support. Made of cast iron. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip.

American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size - Rod length*width:6. 3" *03". 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Covered jaws for protection and grip. Extends out approximately 5" from rod, not adjustable. Strong and dependable support. Available in cast iron. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Can mount vertical or horizontal -- rotates on clamp.





Sciencent Retort Stand Premium Support Stand Rod 20" Acid Resistant, 8" Length x 5" Width Base Size

The Punjab Scientific Industries - Can mount vertical or horizontal -- rotates on clamp. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Rod length*width:6. 3" *03". Strong and dependable support. The rods are nickel plated steel and are threaded to fit the base.

Sciencent Retort Stand Premium Support Stand Rod 20" Acid Resistant, 8" Length x 5" Width Base Size - Extends out approximately 5" from rod, not adjustable. Made of cast iron. Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use. Polished stainless steel corrosion resistant rod measures 20". Stainless steel rod resists corrosion and is 20 inches long.

Base: 6" length by 4" width; rod: 5/16" diameter by 18" length. 3 finger clamp accepts rods up to 20 mm. Maximum width of Jaw opening is 90mm. Attaches to rods up to 15 mm in diameter. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25".





7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color

Hotodeal - Base: 6" length by 4" width; rod: 5/16" diameter by 18" length. Strong and dependable support. Made of cast iron. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Attaches to rods up to 15 mm in diameter. Maximum width of Jaw opening is 90mm. Blue powder coated support stand base 8" x 5. 25". Stainless steel rod 23" length, 0

7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color - 45" dia. 10-1. 5 thread. The rod comes with a a loose & small grip lever to properly screw it in the base. Powder coated polished Royal blue base measures 8"x5" LxW. Length diameter: 10mm 5mm 12mm 7mm 20mm 8mm 25mm 7mm 28mm 8mm 30mm 8mm 35mm 9mm Strong and dependable support. Coated with an acid resistant finish.

4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Coated with an acid resistant finish.





Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C

Thomas Scientific 4430 - Strong die-cast construction. Can mount vertical or horizontal -- rotates on clamp. Strong and dependable support. Rubber-wrapped jaws will safely protect your glassware from scratching bad. United Scientific Supplies. Blue powder coated support stand base 8" x 5. 25". 7. 5" stainless-steel probe is resistant to most chemicals.

Calibrated to iso 17025 traceability standards for reliability of measurements. Padded base prevents scratches on the surface and maintains a much required grip during experiments. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. This thomas thermometer is used to measure temperature in scientific laboratories.

Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C - Specificationstemperature range /td>-50 to 300 degrees c -58 to 572 degrees faccuracy between -30 and 250 C+ or - 1 degree CAccuracy below -30 and above 250 C+ or - 2 degrees CResolution01 degree C from -19. 9 to 199. 9 degrees c, 1 degree outside this rangeStandard metInternational Organization for Standardization ISO 17025Weight2.